banner

Choosing the Right Materials for Coating Equipment to Reduce Operating and Maintenance Costs

Coating equipment operates in harsh environments characterized by high temperatures, high humidity, and exposure to corrosive chemicals such as acids, alkalis, and solvents. Material selection has a direct impact on equipment service life, maintenance costs, and production reliability, making it a critical consideration during production line planning.

A coating line consists of six main systems: pretreatment, spraying, conveying, drying & curing, waste gas treatment, and electrical control. Each section has different material requirements. Pretreatment tanks are commonly made of 304 or 316 stainless stee. For cost-sensitive projects, carbon steel with anti-corrosion coatings is an alternative. PP, PVC, and FRP are also widely used for acid- and alkali-resistant pipes and storage tanks. In painting systems, stainless steel and PTFE (Teflon) linings are preferred for paint-contact components due to their chemical resistance and cleanliness. Electrostatic control and explosion protection must also be considered.

The conveying system requires high strength and wear resistance. Common materials include Q345 steel, Grade 45 carbon steel, and wear-resistant steel, while galvanized steel is widely used for supports and hangers. Drying and curing zones can reach temperatures of 120–300°C. Common materials include 310S and 321 heat-resistant stainless steel and aluminized steel sheets, combined with rock wool insulation. Depending on exhaust gas corrosiveness, waste gas treatment equipment is typically made of FRP, 316 stainless steel, or titanium alloy. Electrical control cabinets generally use powder-coated cold-rolled steel enclosures, engineering plastics, and silicone rubber seals.

Composite functional materials, lightweight alloys, and surface modification technologies are becoming increasingly common in the industry. Choosing materials suited to actual operating conditions helps prevent corrosion damage, reduce unplanned downtime, and control overall project costs, enabling manufacturers to lower costs and improve efficiency.

Contact Surico for professional advice on material selection for your coating line.

Waste Gas Treatment System


Post time: Nov-16-2026

Leave Your Message